Specification of Range Rover Sport-S

Engine

LR-TDV6 3.0 Litre Diesel

Driveline	Transmission	Power (Kw/PS)	Torque	Maximum torque (rpm)	Capacity(cc)
four-wheel drive (4WD)	8-speed	190/258	600	2,000	2,993

No of cylinders	Max speed kph (mph)	Acceleration secs 0-100kph (0-60mph)	Fuel capacity (litres)	Diesel particulate filter
6	210 (310)	7.6 (7.1)	89	standard

Fuel economy

Urban litres/100 km (mpg)	Extra urban litres/100 km (mpg)	Combined litres/100 km (mpg)	CO₂ combined emissions (g/km)
7.8 (36.2)	6.4 (44.1)	6.9(40.9)	182

Dimensions and Capabilities

Length 4,850mm

Wading depth 850mm

Front axle clearance 278mm/213mm

(off-road/standard)

Rear wheel track 1,685mm

Wheel base 2,923mm

Width (with mirrors folded) 2,073mm

Front wheel track 1,690mm

Ramp angle 27.2^o/19.4^o

(off road/standard)

Departure angle 31.0^o/24.9^o

(off road/standard)

Obstacle clearance

Off road height 278mm

Standard ride height 213mm

Turning circle

Kerb-to-kerb 12.1m

Turns lock-to-lock 2.7

Height 1,780mm

Standard Features

Exterior

Toughened front, rear door and quarter light glass

Acoustic laminated windscreen

Power windows (front and rear) with remote power locking (global close)

Rain sensing windscreen wipers

Heated off-screen wiper park position

Rear wash wiper

Exterior mirror auto reverse dipping

Follow-me-home lighting

Automatic headlamps

Rear fog lamps

Side repeater indicators in mirror

Centre high mounted stop lamp (CHMSL)

Hazard lights under heavy braking

Tyre pressure monitoring system (TPMS)

Locking wheel nuts

Roof rack mounting provisions

Twin tail pipes

Transmission & driving dynamics

Trailer stability test

Electrical towing preparation

Front and rear recovery hooks

3,500kg towing capability

Eight-speed Automatic transmission with command shift

Electrical parking brake (EPB0

Speed proportional electrical power assisted steering

Electrical brake assist (EBA)

Anti-lock braking systems (ABS)

Cornering brake control (CBC))

Electronic traction control (ETC)

Hill descent control (HDC)

Electronic cross linked air suspension with automatic load levelling

Four corner air suspension (4CAS)

Reactive grounding response

Single speed transfer box (high range only)

Active vanes (upper only)

Terrain response

Command driving position

Intelligent stop/start system

Gradient release control

Rear park distance sensors with visual display

Roll stability control

Interior features

Interior mirror-manual dipping

Interior mod lighting

Pedal- footrest

Front map lights

Two-zone climate control

Style one-6-way/4-way semi-powered seats

Roller loadspace cover

Load compartment light

Loadspace mounting provisions including roof locations for accessories

Secure stowage

Safety & security

Parametric alarm

Auto locking and crash unlock system

Single point entry, customer configurable

Power operated child locks

Driver and passengers’ airbags (side, seat-front, thorax, pelvis)

Adjustable speed limiter device

Multimedia

Range rover audio system (250w) with 8 speakers

Five inch TFT/LCD instrument cluster

Bluetooth® phone connection

Eight-inch touch screen

RDS decoder

MP3 compatible audio disk

Bluetooth® audio streaming

USB socket

Auxiliary device connectivity (full integrated streaming)

Say what you see intuitive voice control (SWYS)

User selectable screen savers

Auxiliary power sockets (front, second row and loadspace, 12v)

Event data recorder


credits: hgtv.com

How to make plywood arts to beautify the room

Materials needed:

· 4x8” sheet of ½” thick paint-grade plywood

· Chop saw

· 4 quarts’ semi-gloss latex paint in different colors

· Mini roller handle

· Mini foam roller sleeve

· Mini paint pan

· Drop cloth

· Primed 1x2” strips of MDF (medium density fiberboard)

· 8” long strips of 1x3” plywood

· 8” long strips of 1x5” plywood

· Measuring tape

· Pencil

· Sawhorses

· Roll of craft paper

· Drill

· 2” wood screws

· 75 lbs. capacity picture wire

· 75 lbs. capacity picture hooks

· Wire cutters

Mark & Cut Plywood

Use measuring tape and a pencil to mark 4x8” sheet of ½” thick paint-grade plywood to size, then cut with chop saw. Cut primed 1x2” strips of the MDF to size using chop saw, mitering the corners to create a frame. Attach the frame around the outside edge of the plywood sheet.

Next, use chop saw to cut strips of MDF and plywood the same length as the 4x8” sheet.

Mark Angled Cuts

Place the cut sheet of plywood directly on top of the sawhorses, then position each cut of MDF and plywood up against one another along the top of the plywood sheet. Next, use a pencil to mark where strips will be mitered to add geometric shapes and angles. To ensure the positioning of each mitered strip is easily identifiable, mark the strip and its placement to sheet of plywood with corresponding numbers in pencil.

Tip: Mark the top and the bottom of each strip with pencil so that once painted the placement will still be identifiable on the unpainted back side of each strip.

Sand Surfaces

Once all cuts have been made, use orbital sander to smooth all surfaces.

Add Dimension

Once wood pieces are cut to size and sanded, play with the dimension by placing some on their sides and stacking some on top of the others.

Paint Strips

Determine random color placement by marking each strip with paint in its intended color. Lay craft paper or drop cloth on a flat, level surface. Group strips together in like colors, then add two coats of paint with mini roller and/or paintbrush.

Paint Background Color and Glue Strips in a Place

Use mini roller to paint 1x2” frame as well as the plywood, ensuring the pencil marks still show through. Next, use numbers along bottom of each painted strip to position properly. Add glue directly to the plywood, then place each strip individually until pattern is complete. Allow glue to dry for 24hours, then attach picture hooks to the back of the plywood sheet using drill and screws. Unfurl spool of 75lb picture wire to proper length; cut using wire cutters and securely add wire to hooks.